Overhead/gantry Crane Inspection Checklist Template printable pdf download

Overhead/gantry Crane Inspection Checklist Template

Crane: Overhead/Gantry

Definition: Overhead rail (bridge) mounted horizontally travelling crane (trolley)

with vertical hoist lifting and moving capability of designated capacity with hook,

sling, magnet, or bucket lifting mechanism(s).

Potential Hazards:

Falling Materials

Slips/trips/falls during cab access and inspection

Electric shock

Lacerations/hand injuries during cable/sling inspection

Noise

Swinging or suspended materials

Flammable liquids/vapors

Oil and hydraulic fluids

Moving parts/pinch points

Guarding/Shielding:

Cab is enclosed and often at heights requiring caged access ladder if over 20-feet

or other suitable safe stairway and platform. Maintenance activity and inspections

will require fall protection system if unprotected at heights.

Rail/wheel assemblies, if accessible by personnel during operation, require guarding

to cover pinch points. Sweeps or similar rail/wheel interface protection may also be

required if accessible by personnel.

Bridge or trolley require bumpers at each end.

Hoisting rope/chain may require guards at drum.

Accessible moving parts including gears, sprockets, reciprocating equipment and

similar will require guarding if accessible.

Crane Operator should be sufficiently removed and protected from possible flying

materials or swinging loads.

Protective Equipment:

Hard hats*

Safety glasses*

Steel toe/steel shank work boots*

Gloves as needed

Overhead/gantry Crane Inspection Checklist Template