ANNEX F
AWS D1.2/D1.2M:2008
MANUFACTURER’S RECORD QUALIFICATION TESTS
OF WELDER OR WELDING OPERATOR OR TACK WELDER
Name ______________________________
Clock No. ___________ Stamp No. __________ Retest _________
Welding Process _________________________________
Type __________________________________________
In accordance with welding procedure specification WPS No. _________________
and PQR No. _________________
Material Group _______________________
To Group____________ Alloy _______________ To ____________
Thickness of Test Material___________________________________________________________________________
Filler Metal F No. ________________
AWS Class ____________________
Diameter _______________________
Other ___________________________________________________________________________________________
Position ________________________________________
Backing Material _________________________________
Electrical Characteristics: Current ____________________________
Polarity _____________________________
Shielding Gas ___________________________________
Flow __________________________________________
For Information Only
Power Source ____________________________________________________________________________________
(Make, model, type)
Wire Feeder _____________________________________________________________________________________
Welding Torch ____________________________________________________________________________________
VISUAL INSPECTION (3.6)
Appearance____________________
Undercut______________________
Piping Porosity___________________
GUIDED BEND TEST RESULTS
Type of
Specimen
Bend Jig
Bend
Type of
Specimen
Bend Jig
Bend
Bend
Thick., in
Fig. No.
Diam., in
Result
Bend
Thick., in
Fig. No.
Diam., in
Result
Radiographic results: Alternative qualification of groove welds by radiography in accordance with 3.21.6.3 _______________
_______________________________________________________________________________________________
Test conducted by ______________________________
Laboratory: Test No. _____________________________
Test conducted
per _____________________________
FILLET WELD TEST RESULTS
Fracture test _____________________________________________________________________________________
(Describe the location, nature, and size of any crack or tearing of specimen.)
Length and percent of defects_____________________
Inches______________________________________ %
Appearance: Fillet Size _________
in X __________ in
Convexity or Concavity_________________________ in
Test conducted by ______________________________
Laboratory: Test No. _____________________________
Test conducted
per _____________________________
_______________________________________________________________________________________________
We certify that the statements in this record are correct and that the test welds were prepared, welded, and tested in
accordance with the requirements of AWS D1.2/D1.2M, Structural Welding Code—Aluminum.
Signed _______________________________________
By ___________________________________________
(Organization)
Date ________________________________________
Title _________________________________________
Form F(c)
156