North Dakota Oil Producers Report And Oil Purchasers Report Instructions Sheet (Page 12 of 23) in pdf

Specific Instructions For Form T-12 Worksheet

Purchaser’s Statement of Oil Purchases

Special Instructions For Reporting Oil Purchases From A Secondary Or Tertiary Project. If The Project Has Been

Certified For The Incremental Oil Exemption And The Project’s Five Or Ten Year Exempt Period Has Begun:

•

Report 100% Of Purchases From The Project On A Single Line Entry.

•

Use A Well Code Of “ER.”

•

Leave The Following Blocks Blank: Blocks 5 Through 7, Relating To The Gross Production Tax

and Blocks 8 Through 11, Relating To The Oil Extraction Tax.

•

Do Not Remit Taxes On These Purchases; Without Exception, Taxes Must Be Paid With

The Producer’s Report.

LINE INSTRUCTIONS

Purchaser’s Name & Federal I.D.: Print name and nine-digit Federal I.D. number on the top left portion of the worksheet and enter

the page number on the top right portion of the worksheet.

Month & Year: Enter numerals, e.g. 0 7 9 6 for July 1996.

SEPARATE LINE ENTRIES ON THE WORKSHEET ARE REQUIRED IN THE FOLLOWING SITUATIONS FOR OIL

PURCHASED FROM A SINGLE WELL:

a) Test oil recovered from a new well.

b) Condensate recovered from the wet gas stream. See the General Reporting Instructions #14 for procedures on reporting

condensate.

c) Oil produced from different reservoirs (i.e., pools).

d) Oil produced from a new well during the 15-month exempt period or a new horizontal well during the 24-month exempt

period but sold after that period has ended. (The 15 or 24 month period begins on the date of well completion and runs for 15

or 24 consecutive months.)

e) Oil produced from a qualified work-over project well during the 12-month exempt period but sold after that period has ended.

(The 12-month period begins on the first day of the third month after completion of the work-over and runs for 12 consecutive

months.)

Oil produced from a well before the first day of exempt stripper well status but sold after the exempt period begins. (A

stripper well’s exempt period begins on the first day of the month following the 12-month qualifying period.)

g) Oil produced from a qualified horizontal reentry well during the 9-month exempt period but sold after that period has ended.

(The 9-month period begins on the date of well completion and runs for 9 consecutive months.)

h) Oil produced from a qualified two-year inactive well during the 10-year exempt period but sold after that period has ended.

(The 10-year period begins on the first day of the month in which the certification is received by the Commissioner.)

API #: The API number for an individual well, group or unit must be provided in order to process the lease detail information. To

report on an individual well basis, please enter the ten-digit API number assigned by the North Dakota Industrial Commission. The

first two digits of the API number designate the state code (i.e., #33 for North Dakota) and have been provided on the report for your

convenience. The state code is followed by the three-digit county code and five-digit well number. The five-digit well number is not

the same as the file number assigned by the Industrial Commission.

If reporting on a property basis, please enter the nine-digit API number for the group or unit assigned by the Commissioner. The API

number for the group or unit uses the same state and county code designations. The four-character property identification number for

the group or unit will consist of an alpha character followed by three digits.

T/C: If reporting test oil recovered from a new well, enter T. If reporting condensate recovered from the wet gas stream, enter C.

Otherwise, leave this space blank.

Pool Code: Enter the pool code assigned by the Commissioner. If reporting oil production from a well which produces from more

than one pool, enter the applicable code assigned to each pool. A list of assigned pool codes can be found in the Special Instructions

section of this booklet. Please contact the Commissioner if you are unable to determine a required pool code.

Page 11

North Dakota Oil Producers Report And Oil Purchasers Report Instructions Sheet Page 12

Related Articles

Related forms

Related Categories