Faa Form 8110-26 - Supplemental Type Inspection Report (Stir)

Download a blank fillable Faa Form 8110-26 - Supplemental Type Inspection Report (Stir) in PDF format just by clicking the "DOWNLOAD PDF" button.

Open the file in any PDF-viewing software. Adobe Reader or any alternative for Windows or MacOS are required to access and complete fillable content.

Complete Faa Form 8110-26 - Supplemental Type Inspection Report (Stir) with your personal data - all interactive fields are highlighted in places where you should type, access drop-down lists or select multiple-choice options.

Some fillable PDF-files have the option of saving the completed form that contains your own data for later use or sending it out straight away.

ADVERTISEMENT

SUPPLEMENTAL TYPE INSPECTION REPORT
General Instruction
This form provides a means whereby inspectors may record the results of inspections and/or tests, on modified
products presented for supplemental type certificates, accomplished in accordance with instructions contained in the
Type Inspection Authorization (TIA).
Answer each question on this form by placing a check in the appropriate "YES" , "NO", or "NA" (Not
A.
Applicable) block, or by filling in the answer, as appropriate. When an answer requires an explanation, record
the explanation under "REMARKS" or on page 4 (TIA comments).
The applicant's weight and balance report may be used in lieu of the weight and dimensional page of this form,
B.
provided it contains all the information requested. Weight and balance should be included in attachment
section of report, when required.
C. Original FAA Form 8130-9 (317) and FAA Form 8100-1 should be part of the attachments section of this report.
Table of Regulations*
14CFR
CAR
Subject
Balloon
Cert'n
N.U.A
T-Cat
Glider
N-Rotor
T-Rotor
Eng.
Prop
21.31
2
2
2
2
Type Design
3.14
4b.14
6.14
7.14
21.33
1.15(a)
3.15
4b.15
5.15
6.15
7.15
13.15
14.15
Insp. & Tests
21.35
3.16(b)
4b.16
5.16
6.16
7.
Flight Tests
Empty Wt. &
.29
2
4b.104
6.104
7.104
3.72
C.G.
Removable
.31
3.72
31.51
4b.105
6.105
7.105
Ballast
Fabrication
.605
31.35
3.293
4b.302
6.302
7.302
Method
Leveling
.871
3.401
4b.391
6.390
7.390
Means
Equipment -
.1301(a)(4)
3.652
Label
Equipment -
.1301(b)
4b.601(b)
6.601(b)
7.601(b)
Label
Equipment
.1301(c)
4b.601(c)
6.601(c)
7.601(c)
Install
Elec - Haz &
.1351(b)(1)
3.681
6.617
Prot'n
Elec - Haz/
.1351(b)(2)
31.71(b)
4b.622(b)(2)
7.622(b)(2)
Mal. Fail
Elec -
.1431
3.721
Hazard
Elec -
.1431(a)
7.653(a)
Hazard
Electronic
.1431(b)
7.653(b)
Effect
Electronic
.1431(c)
4b.650(c)
Effect
* All regulations are those in effect on or preceding date of recodification.
1 For airworthiness standards, except balloons, a missing FAR denotes a generic requirement, e.g. 14 CFR parts 23, 25, 27, 29.
2 In part, see CFR Re-Designation Tables
FAA Form 8110-26 (04-16)
Page 2

ADVERTISEMENT

00 votes

Related Articles

Related forms

Related Categories

Parent category: Legal
Go
Page of 6