Quality Assurance Program - Oregon Department Of Transportation Page 16
ADVERTISEMENT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28e. The performance exam checklist consists of yes and no blocks. In order to complete the
checklist successfully, all of the yes blocks must be filled out.
In the event, a participant fails the first attempt; a second attempt is given, if time
permits, and after the exam proctor explains the correct procedure. Anyone failing a test
method on the performance exam may repeat that trial during the day of the performance
exam, depending on the timelines and the type of test. Repeat trials will be allowed in
not more than 50% of the total test methods in that performance exam. If the participant
fails on the second attempt the performance exam will stop and the participant will have
to re-take the exam at the scheduling convenience of the Agency.
Passing Score – Written
a. Initial exam (first attempt) WAQTC: An overall score of 70% with a minimum of 60%
on any one-test method.
b. Re-exam (second attempt) WAQTC: An initial exam overall score below 70% will
require a re-exam on all test methods. An initial exam score above 70% overall, but
below 60% on one or more test methods, will require a re-exam on only those test
methods. In the case of one test method comprising the re-exam, the examinee must
receive a score of 70%. In the case of more than one test method comprising the re-
exam, the examinee must receive an overall score of 70% with a minimum of 60% on
any one-test method.
c. Initial exam (first attempt and second attempt) ODOT: An overall score of 70% is
required to successfully complete the exam requirement.
d. Initial exam (first attempt) for the QCT ODOT supplemental exam: An overall score of
80% is required to successfully complete the exam requirement. For the CCT and
CMDT certification exams, an overall score of 75% is required to successfully complete
the exam requirement.
e. Re-exam (second attempt) for the ODOT QCT and CCT exam the participant must meet
the same criteria as the Initial exam (first attempt).
Passing Score – Performance
a. All performance checklists must have 100% yes blanks checked and each test method
must be performed within the designated time limit. Each examinee is allowed two
attempts to complete procedures if time allows.
b. First attempt: Performing all the required tests, application of correct specifications and
meeting the Independent Assurance Parameters is required to receive a pass rating. The
grading is based on pass/fail of all associated tests performed under the desired
certification.
c. Second attempt: The same criteria as the Initial exam must be met.
d. For CMDT, an acceptable Level 2, 3 or 4 HMAC design must be submitted along with
verification materials, as described in Section 6 of the most recent edition of the
“Contractor Mix Design Guidelines for Asphalt Concrete”. A six-month period will be
allowed for the mix design submittal from the date of the written exam.
14
ADVERTISEMENT
0 votes
Related Articles
Related forms
Related Categories
Parent category: Legal