Material Safety Data Sheet
™
HYPERSOLVE
2177A Flintstone Drive
FOR CHEMICAL EMERGENCY
TUCKER, GA 30084
Call INFOTRAC
800/535-5053 (24 HOURS)
Metal Cleaner, Degreaser &
email:
Flux Remover
800/886-8240 or
770/621-8240 (9–5 EST)
Rev. 06/06/2007
Section I: Product Identification
Section II: Chemical or Hazardous Components
™
Product name:
Hypersolve
Chemical Name
n - Propyl Bromide
CAS No.
106-94-5
Synonym:
Alkyl Bromide
Approx. wt.%
>95%
Molecular Formula:
See Section II
Exposure
OSHA -PEL – N/E
MREL – 100 PPM 8 hr. TWA*
The “Plain English” Section
(*) Manufacturer’s recommended exposure limits.
Material Safety Data Sheets can be confusing. Federal law
Chemical Name
1,2 - Butylene Oxide
requires us to print a great deal of technical information,
which probably won’t help the non-scientist. ECOLINK
CAS No.
106-88-7
includes this “PLAIN ENGLISH” section, written to address
Approx. wt. %
<1%
the questions and concerns of the average person. If you
Exposure
ACGIH-TLV-TWA – N/E
have additional health, safety or product questions, don’t
OSHA-PEL-TWA – N/E
hesitate to call us at 800/886-8240.
™
Chemical Name
Dimethoxymethane
Health Hazards: HYPERSOLVE
is an industrial chemical.
We call it “environmentally preferred” because it is intended
CAS No.
109-87-5
to
replace
products
that
are
more
hazardous,
Approx. wt. %
<5%
(Trichloroethylene, Methylene Chloride, etc.). This does not
Exposure
Y (Hazardous)
mean that it is harmless. It is strong enough to remove
OSHA-PEL-TWA - 1000 ppm
tough industrial soils, so it can irritate your skin. We suggest
ACGIH TLV TWA -1000 ppm
you wear gloves, and avoid extended exposure to
unprotected skin. Don’t get it in your eyes, or breath large
Chemical Name
t - Butanol
amounts of the vapor, (it will dry out your nasal passages).
CAS No.
75-65-0
Used on a rag or from a spray bottle, the product won’t
Approx. wt. %
<5%
produce fumes in any great quantity, (don’t spray this
Exposure
Y (Hazardous)
material under high pressure without adequate ventilation).
OSHA-PEL-TWA - 100 ppm
For more exposure and first aid information, please read
ACGIH TLV TWA -100 ppm
through this MSDS.
™
1,2-Butylene Oxide and t-Butanol are subject to the reporting
Flashpoint: HYPERSOLVE
does not have a flashpoint.
requirements of Section 313. 1,3 Butylene Oxide is a CERCLA
Under virtually all industrial circumstances and conditions,
regulated material, RQ 100 lbs.
this material will not burn, (under exactly the right conditions,
it can be made to ignite). Combustion in ordinary use isn’t a
n-Propyl Bromide is listed as a reproductive toxin under the
big concern but if you want to discuss a specific application,
California Safe Drinking Water Act (Proposition 65)
please call us. We do not recommend using this, or any
other industrial solvent, around welding or hot work areas.
ALL MATERIALS IN PRODUCT ARE TSCA LISTED
™
Disposal: HYPERSOLVE
is a brominated solvent. Liquid
waste that is captured after the cleaning process must be
DOT regulated:
No
disposed of according to certain specific guidelines.
Additionally, once this material is contaminated with
Section III: Physical Data
whatever you are cleaning, the resulting mixture may fall
under a hazardous classification, depending on whether or
Appearance & Odor:
Clear, colorless liquid with
not the material you are cleaning is hazardous. If you aren’t
characteristic odor.
sure how to dispose of this material, give us a call and we
o
Boiling Point:
160° F (71
C)
will help you make the right decisions.
Evaporation Rate (nBuAc=1):
6.0
Percent Volatile:
100%
Solubility in Water:
.25g /100 ml @ 20ºC
Specific Gravity:
1.35
Vapor Density (AIR=1):
~4.3
Vapor Pressure:
111 mm Hg @ 20°C
HYPERSOLVE™
Ecolink, Inc.
Material Safety Data Sheet –
Page 1 of 3