Material Safety Data Sheet - Hypersolve - Metal Cleaner, Degreaser & Flux Remover Page 3
ADVERTISEMENT
1
2
3vapors/fumes. Treat this chemical with respect and follow
Section IX: Part Numbers & Packaging
all MSDS instructions.
Product Name
Part No. Packaging
National Stock No.
Section VIII: Control Measures
™
Hypersolve
0338-55 55 Gal Drum 6850-01-450-6160
Small Spill: Absorb liquid on vermiculite, floor absorbent, or
™
Hypersolve
0338-5
5 Gal Pail
6850-01-450-6162
other inert absorbent material and place in suitable
™
Hypersolve
0338-1 4 x 1 Gal Case 6850-01-450-6165
labeled containers for disposal.
Large Spill: Ventilate contaminated area. Eliminate all
ignition sources, (flares, flames including pilot lights,
electrical sparks). Persons not wearing protective
equipment should be excluded from area of spill until
DISCLAIMER: Ecolink, Inc. believes the information contained herein
clean up has been completed. Stop spill at source.
is accurate. However, Ecolink makes no warranty, expressed or
Prevent from entering drains, sewers, streams, etc. If
implied, regarding the accuracy of this data or the results to be
runoff occurs, notify authorities as required. Pump or
obtained by the use thereof. Ecolink, Inc. assumes no responsibility for
vacuum transfer spilled product to clean containers for
injury from the use of the product described herein.
recovery. Transfer contaminated absorbent, soil and
other materials to containers for disposal.
™
Waste Disposal Method: HYPERSOLVE
may be disposed
of as an industrial waste in a manner acceptable to good
END OF MSDS
waste management practices and in compliance with
applicable local, state and federal regulations.
Precautions To Be Taken In Handling & Storing: Material
should be stored in a cool, dry, well-ventilated area.
Aerosol containers may explode when exposed to
0
temperatures at or above 120
F. Since empty containers
retain product residues, all hazard precautions given in
the data sheet must be observed. All metal pails or
drums should be grounded and/or bonded when material
is transferred. Any use of this product in elevated
temperature processes should be thoroughly evaluated
to establish and maintain safe operating conditions.
Sudden release of hot organic chemical vapors or mists
from
process
equipment
operating
at
elevated
temperatures may result in ignition. Keep containers
tightly closed.
Other Precautions: Keep this and all chemicals out of the
reach of children.
HYPERSOLVE™
Ecolink, Inc.
Material Safety Data Sheet –
Page 3 of 3
ADVERTISEMENT
0 votes
Related Articles
Related forms
Related Categories
Parent category: Business