Radioactive Material Shipment Packaging And Documentation Flow Chart

ADVERTISEMENT

• DO NOT remove, cover or deface any of the original 
(1) Verify return source is 
(2) Package return source, 
Return source shipped as 
labels attached to the shipping package unless 
free of removable 
including Return Packing List, 
Type A Quantity, UN 2915 in 
UN 2915
instructed below. 
contamination (leak test 
(F‐108) inside the original 
accordance with applicable 
  
•  Apply the following Labels, (supplied), to the package: 
performed within last 6 
cardboard shipping box using 
sections and paragraphs of 
original packing materials 
months is adequate) 
 
Title 49 and guidance 
o Yellow II Labels completed in Step (7) placed over 
provided  
 
the original Yellow II Labels on the package. 
o Cargo Aircraft Only Labels on same side as the 
 
(4) Perform radiation survey 
(3) Seal shipping box with 
Yellow II Labels  
 
on‐contact with package; 
packing tape; use tamper 
(7) Complete Yellow II Labels. 
o Radioactive Material Type A Package UN 2915 
 
determine maximum on‐
indicating tape or apply 
Record radionuclide(s) and 
sticker (same side as one of the Yellow II labels if 
 
contact radiation level 
tamper indicating label 
Total activity in the Contents 
not on original)  
 
and Activity lines.  
o Return Authorization (F‐115) 
 
Record the T.I. from Step (6) in 
• Remove UN 2910 sticker if on original package. 
the Transport Index Block. 
 
• Remove original address and FedEx shipping labels 
 
• Complete Block 1 of the FedEx Airbill 
  
    
• Complete Block 6 of the FedEx Airbill, by checking  
(5) Determine the 
(6) Determine the T.I.  (unit‐ 
 
 Yes 
  
as per attached Shipper’s Declaration.
Maximum  
radionuclide(s) and 
less number equal to the 
 
• Complete a Dangerous Goods (DG) form, the following 
on‐contact 
YES 
current activity(ies) in 
max. dose rate in mr/hr 
 
radiation 
information must be included on the form:  
units of MBq contained 
at 1 m from package 
level ≥ 0.5 
 
o Proper shipping name = Radioactive material, Type 
in the package  
surface)    Must be ≤ 1.0 
mr/hr? 
A package  
 
to label Yellow II  
o UN Number = 2915, Class = Class 7 
 
o Radionuclide(s) and total activity from Step (5) 
 
o Transport Index as T.I. = (value from Step (6)) 
 
• Remove or cover any of the original labels 
o Type of package = DOT Type 7A 
 
attached to the shipping package. 
NO 
o Label = Yellow II 
 
•  Apply the following stickers, as supplied, to the 
o Package Description = fiberboard box 
 
package: 
o Dimensions – vary, refer to original DG Form.  
 
o Radioactive Material Accepted Package UN 
o Shipper’s 24 hr Emergency Phone Number –IS NOT 
Return source shipped as 
UN 2910 
2910. 
 
provided by RadQual or International Isotopes. 
Limited Quantity, UN 2910 in 
o Package conforms to §173.421 (F‐114) 
• Place 3 copies of the DG form, Guide 162, and the 
accordance with §173.421 
 
and guidance provided:  
o Return Authorization (F‐115) 
Airbill in FedEx Pouch provided.  
 
• Complete Block 1 of the FedEx Airbill 
NOTES 
 
• Complete Block 6 of the FedEx Airbill, by checking 
‐ Shipper’s Declaration of Dangerous Goods forms 
 
 
 Yes 
  
available on the web links provided on Form F‐109. 
Shipper’s Declaration not required.
NOTES 
‐ Form must be TYPED with RED DASHED border. 
‐ Shipper responsible for all shipping costs, unless 
‐ Shipper responsible for all shipping costs, unless other 
other arrangements have been made. 
arrangements have been made. 
Radioactive Material Shipment 
‐ Shipper may select a carrier other than FedEx 
‐ Shipper may select a carrier other than FedEx 
Packaging and Documentation 
‐ Package prepared by qualified and trained 
‐ Package prepared and DG Form completed and signed 
Flow Chart 
shipper.   
by qualified and trained shipper. 
‐ Refer to Title 49 §§172.101, 172.204, 172.403, 
172.704, 173.403, 173.433. Other requirements apply.   
 

ADVERTISEMENT

00 votes

Related Articles

Related forms

Related Categories

Parent category: Business
Go