Sweeper Operating(Checklist Template - 4-Wheel Mechanical printable pdf download

Sweeper Operating(Checklist Template - 4-Wheel Mechanical

Sweeper Operating Checklist - 4-Wheel Mechanical

[Photocopy this checklist for weekly use]

Week of: __________________

Vehicle ID: ____________________

Operator ID: ____________________

Successful machine operation depends on the following standard daily operating procedures. Detailed instructions for sweeping component service are

located in the Service Procedures section of the Operator manual. If you have questions, please contact your local Elgin dealer.

Before Starting the Engine

Sweeper Operating Checklist

Engine

Perform Chassis DOT Pre-trip inspection.

Check engine oil level.

Check radiator coolant level.

Check battery fluid level (if applicable).

Check belt for wear and proper tension.

Check fuel tank. Fill, if necessary.

NOTICE

Use Low or Ultra Low Diesel Fuel Only.

Drain the water separator on the fuel filter.

Video Monitor and Backup Alarm

Check video monitor’s continuous ON switch for proper operation. Turn switch OFF

to check automatic operation when sweeper is reversed.

Check area around sweeper. Make sure it is free of people and obstacles.

Check Video Monitor and Backup Alarm for automatic operation. Make sure that

both the Backup Alarm sounds when sweeper starts to move in reverse and that the

rear view image is seen on the Video Monitor.

CAUTION

The sweeper must move in reverse to check that the Backup Alarm and the Rear

View Video System are both working. Two people, an operator and an observer

outside of the sweeper, will be required to ensure that the testing area is free of

people and obstacles.

Lights, Mirrors, and Tires

Check directional and safety lights.

Check tires for correct pressure, according to tire manufacturer.

Check mirrors for proper adjustment and cleanliness.

Check windshield wiper operation and washer fluid level.

Sweeper Operating(Checklist Template - 4-Wheel Mechanical