Subaru 500000 Km Extended Maintenance Guide Page 2
ADVERTISEMENT
1
2
3500,000
EXTENDED MAINTENANCE GUIDE
KM
Applicable Subaru Models:
2002-2011MY Turbocharged 4-cylinder engines (all models)
C
D
GOOD
GOOD
• Replace engine oil and filter
• Replace engine oil and filter
• Inspect and adjust all fluid levels, including both differentials
• Inspect and adjust all fluid levels, including both differentials
• Inspect operation of all lights, wipers and washers
• Inspect operation of all lights, wipers and washers
• Inspect and adjust drive belt tension
• Inspect and adjust drive belt tension
• Inspect axle boot condition
• Inspect axle boot condition
• Lubricate all latches, hinges and locks
• Lubricate all latches, hinges and locks
• Inspect all steering and suspension components
• Inspect all steering and suspension components
• Check under body for damage (exhaust, brake lines, fuel lines, gas tank)
• Check under body for damage (exhaust, brake lines, fuel lines, gas tank)
• Rotate tires and inspect for wear (4 wheel alignment if necessary)
• Replace coolant*, inspect hoses, clamps and rad fins
• Adjust all tire pressures including spare tire
• Rotate tires and inspect for wear (4 wheel alignment if necessary)
• Service front and rear brakes
• Adjust all tire pressures including spare tire
• Inspect air filter, replace if necessary
• Service front and rear brakes
• Road test
• Inspect air and cabin filters, replace if necessary
• Inspect battery cables, terminals, etc.
BETTER
• Road test
• Test coolant, inspect hoses, clamps and rad fins
• Inspect cabin filter, replace if necessary
BETTER
• Battery/charging system test
• Test brake fluid, replace if necessary
• Perform fuel injector flush and decarbonisation treatment
• Inspect emission hoses and PCV valve
E
• Battery/charging system test
F
GOOD
• Replace engine oil and filter
• Inspect and adjust all fluid levels
GOOD
• Inspect operation of all lights, wipers and washers
• Replace engine oil and filter
• Inspect and adjust drive belt tension
• Inspect and adjust all fluid levels
• Inspect axle boot condition
• Inspect operation of all lights, wipers and washers
• Lubricate all latches, hinges and locks
• Inspect and adjust drive belt tension
• Inspect all steering and suspension components
• Inspect axle boot condition
• Check under body for damage (exhaust, brake lines, fuel lines, gas tank)
• Lubricate all latches, hinges and locks
• Replace coolant*, inspect hoses, clamps and rad fins
• Inspect all steering and suspension components
• Rotate tires and inspect for wear (4 wheel alignment if necessary)
• Check under body for damage (exhaust, brake lines, fuel lines, gas tank)
• Adjust all tire pressures including spare tire
• Replace coolant*, inspect hoses, clamps and rad fins
• Service front and rear brakes
• Rotate tires and inspect for wear (4 wheel alignment if necessary)
• Replace transmission and differential fluids
• Adjust all tire pressures including spare tire
• Replace spark plugs
• Service front and rear brakes
• Inspect air filter, replace if necessary
• Inspect air filter, replace if necessary
• Inspect emission hoses and PCV valve
• Replace timing belt and accessory belts
• Inspect battery cables, terminals, etc.
• Adjust valve clearances
• Road test
• Road test
BETTER
BETTER
• Test brake fluid, replace if necessary
• Battery/charging system test
• Inspect cabin filter, replace if necessary
• Inspect engine/transmission mounts
• Perform fuel injector flush and decarbonisation treatment
• Inspect cabin filter, replace if necessary
• Battery/charging system test
BEST
• Install reconditioned fuel injectors
• Perform lubricant diagnosis
• Perform antifreeze/coolant diagnosis
• Service mass air flow sensor
• Service throttle body
ADVERTISEMENT
0 votes
Related Articles
Related forms
Related Categories
Parent category: Business