Bmw Llc 2002 Models (Except X5) Service Maintenance Checklist Template
ADVERTISEMENT
1
2BMW of North America, LLC
Customer’s Name
2002 Models (except X5)
X5: use checklist SD92-182
Indicate # Lights illuminated in
Chassis Number
Service Interval Indicator
Service Maintenance Checklist
G
G
G
G
G
Y
R
BMW center
Mileage (on Service Interval Ind.)
Only operations that pertain to this vehicle will be performed.
NOTE: Any other requested repairs not listed or covered by the applicable BMW
Repair Order No.
Mileage (on odometer)
Limited Warranty will be charged to the owner and invoiced separately.
State and federal statutes require a properly completed copy
of this form to be retained in the BMW center’s customer file.
E36
E46
E39
E52
TECHNICIAN’S SIGNATURE
BMW Oxygen Sensor Replacement, required at intervals of 100,000 mi.
60
100
100
60
100
60
60
BMW Spark Plug Replacement, required at intervals of _____,000 mi.
BMW Automatic Transmission Service; change ATF at intervals of 100,000 mi.
1200 Mile Service
Read out diagnostic system.
Change oil and oil filter while engine is at operating temperature.
Use only Castrol TWS Motorsport SAE 10W-60 Synthetic oil, or
Castrol Formula RS 10W-60 Synthetic oil, BMW p/n 07 51 0 009 420
Replace transmission fluid.
Replace differential oil.
Check all warning/indicator lights, check control.
Road test with check of brakes, suspension, steering, clutch/manual transmission.
BMW Engine Oil Service
Change oil and oil filter while engine is at operating temperature.
We recommend BMW High Performance 5W-30 Synthetic oil,
p/n 07 51 0 017 866
Change oil and oil filter while engine is at operating temperature.
Use only Castrol TWS Motorsport SAE 10W-60 Synthetic oil, or
Castrol Formula RS 10W-60 Synthetic oil, BMW p/n 07 51 0 009 420
Replace microfilters.
Note: reduce replacement interval in dusty operating conditions.
Check overall thickness of front and rear disc brake pads using
special tool. Record results. If replacement is necessary*:
Examine brake disc surfaces. Clean brake pad contact points in
calipers. Grease wheel centering hubs. Check thickness of parking
brake linings only when replacing rear pads. Record results.
Remove and install front and rear disc brake pads, check overall
thickness. Record results. Examine brake disc surfaces.
Clean brake pad contact point in calipers.
Grease wheel centering hubs.
Check parking brake actuation. Adjust if necessary.
Reset Service Indicator.
Note: Do not reset Service Indicator when additional oil changes
(between the normal intervals) are requested by the customer.
BMW Inspection I: Undercarriage
Change oil and oil filter while engine is at operating temperature.
We recommend BMW High Performance 5W-30 Synthetic oil,
p/n 07 51 0 017 866
Change oil and oil filter while engine is at operating temperature.
Use only Castrol TWS Motorsport SAE 10W-60 Synthetic oil, or
Castrol Formula RS 10W-60 Synthetic oil, BMW p/n 07 51 0 009 420
Check transmission for leaks.
Check rear axle for leaks.
Half shafts: Check for leaks at flexible boots.
Visually check fuel tank, lines and connections for leaks.
Check condition, position, and mounting of exhaust system. Examine for leaks.
Check power steering system for leaks.
Check p/s fluid level; add fluid if necessary.
Check overall thickness of front and rear disc brake pads using
special tool. Record results. If replacement is necessary*:
Examine brake disc surfaces. Clean brake pad contact points in
calipers. Grease wheel centering hubs. Check thickness of parking
brake linings only when replacing rear pads. Record results.
Remove and install front and rear disc brake pads, check overall
thickness. Record results. Examine brake disc surfaces. Clean
brake pad contact points in calipers. Grease wheel centering hubs.
Check front control arm bushings for wear.
BMW NA SD92-181 9/01
*Invoice separately
ADVERTISEMENT
0 votes
Related Articles
Related forms
Related Categories
Parent category: Business