Form Atf F 5300.11a - Annual Firearms Manufacturing And Exportation Report Of Semiautomatic Assault Weapons Page 2
Download a blank fillable Form Atf F 5300.11a - Annual Firearms Manufacturing And Exportation Report Of Semiautomatic Assault Weapons in PDF format just by clicking the "DOWNLOAD PDF" button.
Open the file in any PDF-viewing software. Adobe Reader or any alternative for Windows or MacOS are required to access and complete fillable content.
Complete Form Atf F 5300.11a - Annual Firearms Manufacturing And Exportation Report Of Semiautomatic Assault Weapons with your personal data - all interactive fields are highlighted in places where you should type, access drop-down lists or select multiple-choice options.
Some fillable PDF-files have the option of saving the completed form that contains your own data for later use or sending it out straight away.
ADVERTISEMENT
1
2Instructions for the Preparation of ATF F 5300.11A
INTRODUCTION:
ATF F 5300.11A is intended to report the number of semiautomatic assault weapons made in the United States and entering into commerce. Since semiautomatic assault weapons may be constructed
from foreign firearms and used firearms, the reporting instructions on ATF F 5300.11A are different from those used in ATF F 5300.11 (Annual Firearms Manufacturing and Exportation Report). Please
note that the firearms reported on this form should also be separately reported on the ATF F 5300.11.
1.
REPORTING:
(I)
an ammunition magazine that attaches to the pistol outside of the pistol grip;
(a)
THOSE FEDERAL FIREARMS LICENSEES who hold either a Type 07 (manufacture of
(ii)
a threaded barrel capable of accepting a barrel extender, flash suppressor, forward
firearms) , or a Type 10 (manufacture of destructive devices) must file in compliance
handgrip, or silencer;
with 27 CFR § 178.126.
(iii) a shroud that is attached to, or partially or completely encircles, the barrel and that
(b)
EVEN IF THERE HAS BEEN NO MANUFACTURE OF SEMIAUTOMATIC WEAPONS, A
permits the shooter to hold the firearm with the nontrigger hand without being
REPORT MUST BE FILED.
burned;
(c)
MANUFACTURERS HAVE UNTIL APRIL 1ST to submit an annual report covering the
(iv) a manufactured weight of 50 ounces or more when the pistol is unloaded; and;
preceding year’s business activity. Prepare the report in duplicate, and retain a copy for
your file.
(v)
a semiautomatic version of an automatic firearm; and;
(d)
A FINAL REPORT MUST BE FILED if the manufacturing license is discontinued during
(d)
a semiautomatic shotgun that has at least 2 of :
the year. Please report no later than 30 days following the end of your business activity.
Include the date in Item 7B of the form.
(I)
a folding or telescoping stock;
(e)
MAIL OR FAX THIS COPY TO:
(ii)
a pistol grip that protrudes conspicuously beneath the action of the weapon;
Bureau of Alcohol, Tobacco and Firearms
(iii) a fixed magazine capacity in excess of 5 rounds; and;
650 Massachusetts Ave., N.W., Room 5100
Washington, DC 20226
(iv) an ability to accept a detachable magazine.
FAX: (202) 927-8601.
5.
OTHER DEFINITIONS
2.
TYPE OF PRODUCTION WHICH MUST BE REPORTED:
(a)
Semiautomatic rifle. Any repeating rifle which utilizes a portion of the energy of a
(a)
Report the number of semiautomatic assault weapons in the pistol, rifle, or shotgun
firing cartridge to extract the fired cartridge case and chamber the next round, and
category which you manufactured during the reporting period.
which requires a separate pull of the trigger to fire each cartridge.
(b)
Include semiautomatic assault weapons which you manufactured during the reporting
(b)
Rifle. A weapon designed or redesigned, made or remade, and intended to be fired
period from any foreign or domestic firearms which were not semiautomatic assault
from the shoulder, and designed or redesigned and made or remade to use the energy
weapons when you acquired them. For purposes of this report, the manufacture of a
of the explosive in a fixed metallic cartridge to fire only a single projectile through a
semiautomatic assault weapon includes any modification to an existing firearm where
rifled bore for each single pull of the trigger.
the modification puts the firearm in the category of a semiautomatic assault weapon.
(c)
Semiautomatic pistol. Any repeating pistol which utilizes a portion of the energy of a
(c)
Include semiautomatic assault weapons that were in knockdown (disassembled) condi-
firing cartridge to extract the fired cartridge case and chamber the next round, and
tion, consisting of a receiver and all parts needed to assemble a complete semiautoma-
which requires a separate pull of the trigger to fire each cartridge.
tic assault weapon, where the parts were packaged together at the time you sold, ship-
ped, or transferred them.
(d)
Pistol. A weapon originally designed, made, and intended to fire a projectile (bullet)
from one or more barrels when held in one hand, and having (a) a chamber(s) as an
(d)
Include semiautomatic assault weapons which you manufactured during the reporting
integral part(s) of, or permanently aligned with, the bore(s); and (b) a short stock de-
period for the armed forces of the United States, or for transfer to other manufacturers.
signed to be gripped by one hand and at an angle to and extending below the line of the
bore(s).
3.
TYPE OF PRODUCTION NOT TO BE REPORTED:
(e)
Semiautomatic shotgun. Any repeating shotgun which utilizes a portion of the energy
(a)
Do not report manufacture of existing semiautomatic assault weapons which you
of a firing cartridge to extract the fired cartridge case and chamber the next round, and
acquired from another source.
which requires a separate pull of the trigger to fire each cartridge.
(b)
Do not report manufacture of any firearm which did not meet the definition of a semi-
(f)
Shotgun. A weapon designed or redesigned, made or remade, and intended to be fired
automatic assault weapon at the time you sold, shipped or otherwise transferred it.
from the shoulder, and designed or redesigned and made or remade to use the energy
of the explosive in a fixed shotgun shell to fire through a smooth bore either a number of
4.
DEFINITION OF A SEMIAUTOMATIC ASSAULT WEAPON:
ball shot or a single projectile for each single pull of the trigger.
The term semiautomatic assault weapon means -
6.
EXECUTION. Every report must be executed (signed) by a person authorized to sign and be
responsible for the completeness and accuracy of the information furnished.
(a)
any of the firearms, or copies or duplicates of the firearms, in any caliber, known as -
The recordkeeping requirement for this form is indefinite.
(I)
Norinco, Mitchell, and Poly Technologies Avtomat Kalashnikovs (all models) ;
PAPERWORK REDUCTION ACT NOTICE
(ii)
Action Arms Israeli Military Industries UZI and Galil;
This form is in accordance with the Paperwork Reduction Act of 1995. The information you provide is
(iii) Beretta Ar70 (SC70);
used to compile statistics on the manufacture and exportation of semiautomatic assault weapons. The
furnishing of this information is mandatory when requested pursuant to the provisions of 18 U.S.C. §
(iv) Colt AR-15;
923(g).
(v)
Fabrique National FN/FAL, FN/LAR, and FNC;
The estimated average burden associated with this collection of information is 6 minutes per respondent
or recordkeeper, depending on individual circumstances. Comments concerning the accuracy of this
(vi) SWD M-10, M-11, M-11/9, and M-12;
burden estimate and suggestions for reducing this burden should be addressed to Reports Management
Officer, Document Services Branch, Bureau of Alcohol, Tobacco and Firearms, Washington, DC 20226.
(vii) Steyr AUG;
An agency may not conduct or sponsor, and a person is not required to respond to, a collection of
(viii) INTRATEC TEC-9, TEC DC-9, and TEC-22; and
information unless it displays a currently valid OMB control number.
(ix) revolving cylinder shotguns, such as (or similar to) the Street Sweeper and Striker
12;
(b)
a semiautomatic rifle that has an ability to accept a detachable magazine and has at
least 2 of:
(I)
a folding or telescopic stock;
(ii)
a pistol grip that protrudes conspicuously beneath the action of the weapon;
(iii) a bayonet mount;
(iv) a flash suppressor or threaded barrel designed to accommodate a flash
suppressor; and;
(v)
a grenade launcher;
(c)
a semiautomatic pistol that has an ability to accept a detachable magazine and has at
least 2 of :
ATF F 5300.11A (2-98)
ADVERTISEMENT
0 votes
Related Articles
Related forms
Form Atf F 5300.11 - Annual Firearms Manufacturing And Exportation Report Under 18 U.s.c. Chapter 44, Firearms
Legal
Form Atf F 5300.11 - Annual Firearms Manufacturing And Exportation Report - Washington Department Of Treasury
Financial
Atf Form 5300.11 - Annual Firearms Manufacturing And Exportation Report Under 18 U.s.c. Chapter 44, Firearms
Legal
Related Categories
Parent category: Legal