Werewolf Halloween Pumpkin Carving Template (Page 3 of 3) in pdf

Werewolf Halloween Pumpkin Carving Template Page 3

Pumpkin Carving Instructions

using the Dremel Pumpkin Carving Tool

After downloading the Pumpkin Carving templates you're ready to

begin. Please note The Pumpkin Carving Kit should be used to "carve"

layers of skin away from your pumpkin so that light will "glow" through

the pumpkin. You do not cut all the way through the pumpkin.

1. Use a knife to cut a lid for your pumpkin. Angle the knife

towards the center of the pumpkin as you cut so that the lid will

rest on top of the pumpkin after the cut has been made.

2. Use a large spoon to clean out the entire inside of the pumpkin.

It is best if the walls of your pumpkin are approximately 1/4"-

1/2" thick.

3. Based on the size of your pumpkin, you can enlarge or reduce

the size of your template using a copy machine if needed.

4. Using spray-on adhesive, apply your template to the pumpkin.

5. Turn the tool on LOW and begin tracing the areas to be

removed.

6. You can use the HIGH setting for large area material removal.

7. The key is to remove approximately the same amount of

material on your whole pumpkin to achieve a uniform depth.

8. Once you've finished, remove the paper template, place a light

source, such as a candle, in the pumpkin, dim the lights, and see

how well the light shines through your carving.

If you want more light to shine through, turn the lights back on,

remove the candle, and remove additional material from your

pumpkin.

FOR MORE HALLOWEEN RESOURCES VISIT

ALL FAMILY RESOURCES

– Visit our Halloween Site

– Shop for Halloween & the Holidays

– Fall, Thanksgiving & Holiday Season

gift baskets, and beautiful arrangements of flowers fresh from the

growers

Werewolf Halloween Pumpkin Carving Template Page 3