Atf E-Form 5300.11 - Annual Firearms Manufacturing And Exportation Report Page 2
Download a blank fillable Atf E-Form 5300.11 - Annual Firearms Manufacturing And Exportation Report in PDF format just by clicking the "DOWNLOAD PDF" button.
Open the file in any PDF-viewing software. Adobe Reader or any alternative for Windows or MacOS are required to access and complete fillable content.
Complete Atf E-Form 5300.11 - Annual Firearms Manufacturing And Exportation Report with your personal data - all interactive fields are highlighted in places where you should type, access drop-down lists or select multiple-choice options.
Some fillable PDF-files have the option of saving the completed form that contains your own data for later use or sending it out straight away.
ADVERTISEMENT
1
2Instructions for the Preparation of ATF Form 5300.11
1. Reporting:
machinegun can be assembled if such parts are in the possession or
(a) Those Federal Firearms Licensees who hold either a Type 07
under the control of a person.
(manufacture of firearms), or a Type 10 (manufacture of destructive
devices) must file in compliance with 18 U.S.C. § 923(g)(5)(A), on an
(h) Any Other Weapon - Any weapon or device capable of being
annual basis.
concealed on the person from which a shot can be discharged
through the energy of an explosive, a pistol or revolver having a
(b) Even if there has been no production, an annual report must be
barrel with a smooth bore designed or redesigned to fire a fixed
filed.
shotgun shell, weapons with combination shotgun and rifle barrels
12 inches or more, less than 18 inches in length, from which only a
(c) Manufacturers have until April 1st to submit an annual report
single discharge can be made from either barrel without manual
covering the preceding year's business activity. Prepare the report in
reloading, and shall include any such weapon which may be
duplicate, and retain a copy for your file.
readily restored to fire. Such term shall not include a pistol or a
revolver having a rifled bore, or rifled bores, or weapons designed,
(d) A final report must be filed if the manufacturing license is
made, or intended to be fired from the shoulder and not capable of
discontinued during the year. Please submit a report no later than 30
firing fixed ammunition.
days following the end of your business activity. Include the date in
Item 7 of the form.
(i) Miscellaneous Firearms - Any firearms not defined above such as
pen guns, starter guns, silencers, etc. You must identify or briefly
(e) Mail the original copy to:
describe the firearm. Attach a separate sheet if necessary.
Bureau of Alcohol, Tobacco, Firearms and Explosives
3. Should all of your production fall within the following categories,
Firearms and Explosives Division
your report would reflect "0" [Zero]:
244 Needy Road
Martinsburg, WV 25405
(a) Firearms produced solely for the official use of the Armed Forces
of the United States;
Or this report may be faxed to ATF at:
(304) 616-4591
(b) Firearms disposed of to another licensed firearms manufacturer for
2. Terms used in this report have the following meanings:
the purpose of final finishing and assembly;
(a) Production - Firearms manufactured during the Calendar Year, to
(c) Destructive devices as defined under 18 U.S.C. § 921(a)(4) and 26
include separate frames or receivers, actions or barreled actions,
U.S.C. § 5845(f);
disposed of in commerce. A manufacturer who uses these items,
produced by another licensed manufacturer, in the assembly and
(d) Antique firearms as defined under 18 U.S.C. § 921(a)(16);
production of complete firearms, will include the manufacture of
these firearms in this report. Separate frames or receivers, actions or
(e) Firearms incorporating frames or receivers of foreign manufacture;
barreled actions, are to be included in this report when they are
or
exported or disposed of in commerce to a person other than a
licensed manufacturer. Please see exceptions noted in instruction
(f) Firearms remanufactured or customized and previously in the
number 3.
possession of nonlicensees.
(b) Pistol - A firearm designed and intended to be fired by one hand, the
4. Execution. Every report must be executed (signed) by a person
cartridges for which must be inserted directly into the chamber
authorized to sign and be responsible for the completeness and
which must be inserted directly in the chamber which is an integral
accuracy of the information furnished.
part of the barrel.
Paperwork Reduction Act Notice
(c) Revolver - A firearm designed and intended to be fired by one hand,
the cartridges for which must be inserted in individual chambers
This form is in accordance with the Paperwork Reduction Act of 1995.
successively in alignment with the barrel and firing pin.
The information you provide is used to compile statistics on the
manufacture and exportation of firearms. The furnishing of this
(d) Rifle - A firearm designed and intended to be fired from the
information is mandatory (18 U.S.C § 921(g)).
shoulder and using a fixed metallic cartridge to fire a single
projectile through a rifled bore.
The estimated average burden associated with this collection of
information is 45 minutes per respondent or recordkeeper, depending on
(e) Shotgun - A firearm designed and intended to be fired from the
individual circumstances. Comments concerning the accuracy of this
shoulder and using a fixed shotgun shell to fire through a smooth
burden estimate and suggestions for reducing this burden should be
bore.
addressed to Reports Management Officer, Document Services Branch,
Bureau of Alcohol, Tobacco, Firearms and Explosives, Washington, DC
(f) Combination Gun - A firearm designed and intended to be fired
20226.
from the shoulder, having two dissimilar barrels, or more than two
barrels which are rifled, smooth bore, or a combination thereof.
An agency may not conduct or sponsor, and a person is not required to
respond to, a collection of information unless it displays a currently valid
(g) Machinegun - Any weapon which shoots, is designed to shoot, or
OMB control number.
can be readily restored to shoot, automatically more than one shot
without manual reloading by a single function of the trigger, the
frame or receiver of any such weapon, any combination of parts
designed and intended for use in converting a weapon into a
machinegun, and any combination of parts from which a
ATF E-Form 5300.11
Revised November 2003
ADVERTISEMENT
0 votes
Related Articles
Related forms
Atf Form 5300.11 - Annual Firearms Manufacturing And Exportation Report Under 18 U.s.c. Chapter 44, Firearms
Legal
Form Atf F 5300.11 - Annual Firearms Manufacturing And Exportation Report Under 18 U.s.c. Chapter 44, Firearms
Legal
Form Atf F 5300.11 - Annual Firearms Manufacturing And Exportation Report - Washington Department Of Treasury
Financial
Form Atf F 5300.11a - Annual Firearms Manufacturing And Exportation Report Of Semiautomatic Assault Weapons
Legal
Atf E-form 5300.38 - Application For An Amended Federal Firearms License - U.s Department Of Justice
Legal
Related Categories
Parent category: Legal