Hardous Waste Permit Information Form - Kansas Department Of Health And Environment (Page 4 of 12) in pdf

EPA ID Number

9. Description of Hazardous Wastes - Enter Information in the Sections on Form Page 5

EPA HAZARDOUS WASTE NUMBER – Enter the four-digit number from 40 CFR, Part 261 Subpart D of each listed hazardous waste you will

handle. For hazardous wastes which are not listed in 40 CFR, Part 261 Subpart D, enter the four-digit number(s) from 40 CFR Part 261, Subpart

C that describes the characteristics and/or the toxic contaminants of those hazardous wastes.

B. ESTIMATED ANNUAL QUANTITY – For each listed waste entered in Item 9.A, estimate the quantity of that waste that will be

handled on an annual basis. For each characteristic or toxic contaminant entered in Item 9.A, estimate the total annual

quantity of all the non-listed waste(s) that will be handled which possess that characteristic or contaminant.

C. UNIT OF MEASURE – For each quantity entered in Item 9.B, enter the unit of measure code. Units of measure which must be

used and the appropriate codes are:

ENGLISH UNIT OF MEASURE

CODE

METRIC UNIT OF

CODE

MEASURE

POUNDS

KILOGRAMS

TONS

METRIC TONS

If facility records use any other unit of measure for quantity, the units of measure must be converted into one of the required

units of measure, taking into account the appropriate density or specific gravity of the waste.

D. PROCESSES

PROCESS CODES:

For listed hazardous waste: For each listed hazardous waste entered in Item 9.A, select the code(s) from the list of

process codes contained in Items 7.A and 8.A on page 3 to indicate all the processes that will be used to store, treat,

and/or dispose of all listed hazardous wastes.

For non-listed waste: For each characteristic or toxic contaminant entered in Item 9.A, select the code(s) from the list of

process codes contained in Items 7.A and 8.A on page 3 to indicate all the processes that will be used to store, treat,

and/or dispose of all the non-listed hazardous wastes that possess that characteristic or toxic contaminant.

NOTE: THREE SPACES ARE PROVIDED FOR ENTERING PROCESS CODES. IF MORE ARE NEEDED:

Enter the first two as described above.

2. Enter “000” in the extreme right box of Item 9.D(1).

3. Use additional sheet, enter line number from previous sheet, and enter additional code(s) in Item 9.E.

PROCESS DESCRIPTION: If code is not listed for a process that will be used, describe the process in Item 9.D(2) or in

Item 9.E(2).

NOTE: HAZARDOUS WASTES DESCRIBED BY MORE THAN ONE EPA HAZARDOUS WASTE NUMBER – Hazardous

wastes that can be described by more than one EPA Hazardous Waste Number shall be described on the form as follows:

Select one of the EPA Hazardous Waste Numbers and enter it in Item 9.A. On the same line complete Items 9.B, 9.C,

and 9.D by estimating the total annual quantity of the waste and describing all the processes to be used to store,

treat, and/or dispose of the waste.

In Item 9.A of the next line enter the other EPA Hazardous Waste Number that can be used to describe the waste. In

Item 9.D.2 on that line enter “included with above” and make no other entries on that line.

Repeat step 2 for each EPA Hazardous Waste Number that can be used to describe the hazardous waste.

EXAMPLE FOR COMPLETING Item 9 (shown in line numbers X-1, X-2, X-3, and X-4 below) – A facility will treat and dispose of an

estimated 900 pounds per year of chrome shavings from leather tanning and finishing operations. In addition, the facility will treat

and dispose of three non-listed wastes. Two wastes are corrosive only and there will be an estimated 200 pounds per year of each

waste. The other waste is corrosive and ignitable and there will be an estimated 100 pounds per year of that waste. Treatment will

be in an incinerator and disposal will be in a landfill.

B. Estimated

EPA Hazardous

C. Unit of

D. PROCESSES

Line

Annual

Waste No.

Measure

Number

Qty of

(2) PROCESS DESCRIPTION

(Enter code)

(1) PROCESS CODES (Enter Code)

Waste

(If code is not entered in 9.D(1))

900

400

100

Included With Above

Page 4 of 6

Hardous Waste Permit Information Form - Kansas Department Of Health And Environment Page 4

Related Articles

Related forms

Related Categories