Procedure For Equalizing Boat Weight For Class Racing (Page 2 of 4) in pdf

Procedure For Equalizing Boat Weight For Class Racing Page 2

paragraph IV of the Floatation Worksheet & Certificate); for racing, those items may be relocated from

their temporary locations to any other place on the boat except as prohibited in paragraph E.2 below.

E. Required Equipment & Locations:

All equipment, ballast (water, fuel and lead) and other items referenced in paragraphs C and D

must be located on the boat at all times and, if locations are specified herein or in the Floatation

Worksheet & Certificate, must be located in their specified locations.

While racing, except for spinnakers and the standard cooler (in its standard location), the

equipment and other items referenced under Paragraphs C and D may not be located either below

or on top of the main cabin flooring or the flooring of the head compartment/changing area.

Floatation Worksheet & Floatation Worksheet & Certificate. All items referenced under Paragraphs C and

D required aboard to achieve proper sink shall be listed on a J/105 CLASS FLOATATION WORKSHEET

& CERTIFICATE substantially in the form of Exhibit 7.3B to the Class Rules, with its corresponding

weight, gallons and location indicated, where applicable, which shall be duly completed and signed by an

Owner of the boat and co-signed by the Chief Measurer or his or her designee or any Fleet Measurer or his

or her designee. A copy of such Floatation Worksheet & Certificate shall be aboard at all times while

racing.

Procedure For Equalizing Boat Weight For Class Racing Page 2