Primary Mill Questionnaire (Page 3 of 8) in pdf

Pages 2 -- Section 2 - Raw Material (Logs/Roundwood) Received and

Processed at Mill, 2015 (Continued)

* SECTION 2.3 - Indicate if actual amounts or percents will be used. Enter the amount or

percent of each species group processed at the mill for the Raw Material

(Logs/Roundwood) checked in Section 2.1. Across the columns at the top of the table,

enter the State and county that the Raw Material (Logs/Roundwood) came from.

Then fill in the table entering the amount or percent of each species that came from

each county.

NOTE: For pulp mills, composite panel/engineered wood product mills,

industrial fuelwood, or mulch mills -

- When whole tree chip receipts are recorded, please write "W" after the amount

or percent that comes from whole-tree chips.

- When peeled, flail de-barked logs, or peeled or flail de-barked chipped logs

receipts are recorded, please write "P" after the amount or percent.

Pages 3 (This page only needs to be completed once per mill)

* SECTION 3.1 -- Check all the types of equipment in use at the mill.

* SECTION 3.2 --Check the types of products produced from logs or chipped logs.

* SECTION 3.3 -- Please enter amount of mill product produced from each type of

Raw Material (Logs/Roundwood) by softwoods and hardwoods. Example: the amount

of softwood lumber that was processed from saw logs.

* Check if you export finished product out of the Country. If 'YES', Enter the percent of the

finished product exported out of the County.

Pages 4 -- Section 4—MILL RESIDUE and MILL RESIDUE USE for 2015

NOTE: This page does not need to be completed for volumes of logs exported

out of the Country.

* SECTION 4.1 - Check the type of Raw Material (Logs/Roundwood) processed from

Page 2, section 2.1.

* SECTION 4.2 - Enter the amount of mill residues that were generated by processing the

type of Raw Material (Logs/Roundwood) from Page 2, Section 2.1 for each type

of mill residue and for Softwoods and Hardwoods. Indicate the "Unit of Measure."

* SECTION 4.3 - Indicate if whole logs or short log sections were chipped as mill residues

and included in amounts in Page 2, Section 2.2.

* SECTION 4.4 - Enter the percent for each type of "USE OF MILL RESIDUE" by the type of

mill residue, and Softwoods and Hardwoods.

Page 5 - Section 5 —Plant Byproducts Received and Boiler/Hog fuel Received.

Note: This page is only for mills that use mill residue to produce product selected

on Page 2, Section 2.1,

those mills that receive wood material for boiler/hog fuel)

* SECTION 5.1 Enter the amount of wood-using plant byproducts used in the production of

this mill primary product selec on Page 2, Section 2.1, by State of orign, plant byproduct

type, and Softwood and Hardwood. Check the "Unit o Measure".

DO NOT include wood material used for Boiler/hog fuel.

* SECTION 5.2 Enter the amounts of whole-tree chips, in-woods chips, or tops and limb wood

used for boiler/hog fuel, by State of origin, and Softwood and Hardwood. Check

the "Unit of Measure".

Primary Mill Questionnaire Page 3

Related Articles

Related forms

Related Categories