Bernina Owl Puppet Template (Page 2 of 3) in pdf

Bernina Owl Puppet Template Page 2

Pin your ears, wings and feet to the owl face. Stitch them in place by

sewing all the way around the owl face using a ¼ inch or 7mm seam

allowance.

Take one of your large pieces of Minky, lay it down so that the pile is

running downward. Pin your owl body in place (use diagram below as

guide), tucking the ¼ inch or 7mm seam allowance as you go. Stitch

the body down 1/8 inch or 4mm from the edge. Mark the position of

the button with a pin.

From your scraps of Minky cut a strip that measures 10cm x 3cm. Fold

the strip into thirds hiding one of the raw edges. Topstitch the visible

raw edge down. Fold this piece in half to create a loop. Find the centre

of the short side of your blanket, closest to the owl and stitch it down.

Stitch the button into place.

10 Take your two large pieces of Minky and pin right sides

together. Cut all 4 corners back to a curve. Stitch around

the edges using a ¼ inch or 7mm seam allowance, ensuring

you leave a gap on one on the small sides. Turn your blanket

through and top stitch around the edges, sewing the

opening shut as you go.

Bernina Owl Puppet Template Page 2