Material Safety Data Sheet - Pen-T-10 Aerosol Penetrant

ADVERTISEMENT

Material Safety Data Sheet
2177A Flintstone Drive
FOR CHEMICAL EMERGENCY
PEN-T-10 AEROSOL
TUCKER, GA 30084
Call INFOTRAC
800/535-5053 (24 HOURS)
Penetrant
email:
800/886-8240 or
Rev. 06/06/2007
770/621-8240 (9–5 EST)
Section I: Product Identification
Section II: Hazardous Components
Product name:
PEN-T-10
Chemical Name
Aliphatic Hydrocarbon
Synonym:
Hydrocarbon-Based
Cleaner and Lubricant
CAS No.
64741-44-2
Molecular Formula:
Proprietary Information
Exposure
TLV/PEL - 5 mg/m3 pel/tlv mist
Chemical Name
Petroleum Distillate
The “Plain English” Section
CAS No.
64742-54-7
Material Safety Data Sheets can be confusing. Federal law
requires us to print a great deal of technical information,
which probably won’t help the non-scientist. ECOLINK
Chemical Name
Butane
includes this “PLAIN ENGLISH” section, written to address
CAS No.
106-97-8
the questions and concerns of the average person. If you
have additional health, safety or product questions, don’t
hesitate to call us at 800/886-8240.
Chemical Name
Propane
Health Hazards: PEN-T-10 is an industrial chemical and
CAS No.
106-97-8
can therefore irritate your skin. We suggest you wear
gloves, and avoid extended exposure to unprotected skin.
Don’t get it in your eyes, or breath large amounts of the
RCRA REGULATED:
No
vapor, it will dry out your nasal passages). Used on a rag or
from a spray bottle, the product won’t produce fumes in any
CERCLA (superfund):
N/A
great quantity, (don’t spray PEN-T-10 under high pressure
ALL MATERIALS IN PRODUCT ARE TSCA LISTED.
without adequate ventilation). For more exposure and first
aid information, refer to MSDS Sections II, VI.
DOT Regulated:
No
DOT Haz. Class:
ORM-D
Flashpoint: PEN-T-10 is considered a non-flammable
DOT Shipping Name:
Consumer Commodity
aerosol. Combustion in ordinary use isn’t a big concern. If
PEN-T-10 is used on rags, the rags can ignite if exposed to
DOT Number:
N/A
an open flame because the solvent is “wicked” onto the
(Questions concerning DOT information refer to DOT manual cfr
cloth. Be sure to dispose of rags in an airtight container
49, Chapter 1, 10/96 edition)
specifically designed to prevent spontaneous combustion.
Don’t use PEN-T-10 (or any other combustible solvent)
around welding or any other hot work area, because it CAN
Section III: Physical Data
ignite around a heat source.
Boiling Point:
N/E
Disposal: PEN-T-10 is not considered a hazardous waste
Specific Gravity (H2O=1):
0.81
product. Wrap empty PEN-T-10 container and place in trash
collection. Do not reuse container. If you spill PEN-T-10,
Can Pressure (psig.):
65-75 @25° C
notify the proper environmental people at your company
Vapor Density (AIR=1):
>1
ASAP. Once PEN-T-10 is contaminated with whatever you
are cleaning, the resulting mixture may fall under a
Evaporation Rate (nBuAc):
<1
hazardous classification, depending on whether or not the
Solubility In Water:
Negligible
material you are cleaning is hazardous. If you are not sure
how to dispose of the used PEN-T-10 give us a call and we
Percent Volatile:
N/D
will help you make the right decision.
Appearance & Odor:
Red Spray with terpene odor
VOC Content
8% by weight
Ecolink, Inc.
Material Safety Data Sheet – PEN-T-10 AEROSOL
Page 1 of 3

ADVERTISEMENT

00 votes

Related Articles

Related forms

Related Categories

Parent category: Business
Go
Page of 3