First Article Inspection Page 3
ADVERTISEMENT
1
2
3
4
5Firstmark Corporation
10.01.02
Document No.
QUALITY SYSTEM
Revision: (M)
Page: 3 of 5
WORK INSTRUCTION
Subject: First Article Inspection
-Equipment Used/Notes (Supplier)(Specific inspection
equipment used to verify the requirement)
-Supplier Findings (Actual Data) (Actual values recorded
by Supplier during verification/inspection/test process.
Record “Pass” or “Fail” accordingly for non-numeric
requirements)
-Page __ of __ (Complete blanks as appropriate at bottom
of form “b” if use of form “b” is required for additional
space).
2.5 Firstmark Receiving Inspection or an Independent Inspection Facility will review
form “b” from Supplier for completeness in accordance with the requirements of
this work instruction.
2.6 If First Article Inspection data was provided by the Supplier, Firstmark Receiving
Inspection or the Independent Inspection Facility shall select several part
characteristics (use 10% as a guideline) and inspect them to validate the suppliers
First Article results.
2.7 If First Article Inspection data was not provided by the Supplier, Firstmark
Receiving Inspection or the Independent Inspection Facility may perform 100%
inspections per the drawing, specification or OS (if applicable) requirements.
Firstmark Receiving Inspection or the Independent Inspection Facility is
responsible for adding the following information to forms “b”:
-Inspector Name (also list company name if Independent Inspection
Facility)
-Date
-FIRSTMARK (Or Independent Inspection Or Test Facility) Findings
(Actual Data) (If a specific requirement is not listed within the
Receiving Inspection Template and if the Supplier furnished
adequate inspection/test data, record “N/A”. Otherwise, complete
the inspection process for each specific requirement and record the
actual inspection/test results.
-Equipment Used/Notes (Firstmark or Independent Inspection Or
Test Facility) (If a specific requirement is not listed within the
Receiving Inspection Template and if the Supplier furnished
adequate inspection/test data record “N/A.” Otherwise, complete
the inspection process for each specific requirement and record the
actual inspection/test equipment used
Printed copies are for reference only!
ADVERTISEMENT
0 votes
Related Articles
Related forms
Related Categories
Parent category: Business