Form Cab-2 - Air Or Water Pollution Control Equipment Application (Page 4 of 7) in pdf

General Information

1. Complete a separate application for each facility for which certiﬁ cation is desired.

2. Submit applications to the Department of Environmental Quality (DEQ),

Permitting and Compliance Divi-

sion,

PO Box 200901, Helena, MT 59620-0901, with copies to the Department of Revenue (DOR), Busi-

ness Tax and Valuation Bureau, PO Box 7149, Helena, MT 59604-7149, and to the county commissioners

of the county in which the property is located. Please call the Department of Environmental Quality Per-

mitting and Compliance Division, (406) 444-4323, with speciﬁ c questions regarding air or water pollution

control equipment.

3. To be eligible to receive pollution control status for the current tax year, the Department of Environmental

Quality must receive the application on or before January 1 of that year.

4. When necessary, attach additional sheets to furnish required information with the corresponding question

number(s).

5. Please note on the application when requested information is not applicable to the facility for which the ap-

plication is made.

Section A

Complete general applicant and facility information, items 1 through 5.

Section B

1. Describe the general nature of the operation conducted at the location or proposed location of the facility.

2. If the facility does not control or is not intended to control wastewater from the entire operation conducted

at the facility location, describe the speciﬁ c process(es) whose wastewater the facility controls (or intended

to control).

General Instructions

Section C

1. Describe in detail the speciﬁ c process(es) whose emissions or discharges the facility, equipment or device

is intended to control.

2. List the contaminants that evolve from the unit process and that are discharged into the outdoor environ-

ment. The rates of emissions with and without the facility should be given in pounds per hour and tons per

year for air pollution control equipment. List water pollution control equipment discharges in pounds per

day. Indicate efﬁ ciencies for both design and actual performance.

3. Calculations for the method, formula or theory used in estimating rate of emissions must be attached.

4. Give the height of discharge (air only).

Section D

1. Identify the type of air or water pollution control facility, and describe in detail, the speciﬁ c equipment for

which certiﬁ cation is desired, including the name of the manufacturer.

2. Clearly describe the type of maintenance needed or anticipated to keep the facility operating at maximum

efﬁ ciency. Include estimated hours of downtime and whether efﬂ uent continues through these periods.

3. Describe the ﬁ nal disposition of contaminants, air or water, which have been removed, altered, disposed of

or stored by the facility.

4. Give the approximate date on which the facility was ﬁ rst placed (or is expected to be placed) in service and

effectively operated.

Items 5. through 7. are self-explanatory.

Section E

1. Application certiﬁ cation must be signed.

Section F

Agency review.

Form Cab-2 - Air Or Water Pollution Control Equipment Application Page 4

Related Articles

Related forms

Related Categories