Property Report Checklist Supplement Template Page 4

ADVERTISEMENT

7.0 Plumbing
30) _____ Interior supply/ distribution piping- Observe and report on visible type of materials (must describe type of
piping material specifically, e.g., copper, polybutylene, galvanized, etc. – not simply plastic or metal) and
condition to the extent the piping is visible, and provide a recommendation to correct, monitor or evaluate by
appropriate persons to client if polybutylene piping is present.
31) _____ Supports, insulation- Observe and report on condition of all visible supports and insulation (e.g.,
displaced, damaged, missing, not required, etc.).
32) _____ Fixtures, faucets- Observe and report on condition and operation of all fixtures and faucets (may be
reported in plumbing section or individual room description areas).
33) _____ Functional flow- Observe and report on the supply system functional flow (volume, not pressure) and
describe the method used to determine or have the term functional flow in the report.
34) _____ Water supply leaks*- Observe and report on any evidence of supply side leaks.
35) _____ Cross connections*- Observe and report on the presence of any potential cross connections (e.g.,
dishwasher high-loop, hose bib anti-siphon fittings, etc.).
36) _____ Waste and vent piping system- Observe and report on visible type of materials (must describe type of
piping specifically, e.g., ABS plastic, galvanized, etc. – not simply plastic or metal) and condition to the extent
the piping is visible.
37) _____ Drain leaks*- Observe and report on any evidence of leakage of the waste system piping.
38) _____ Functional drainage- Observe and report on the waste system functional drainage and describe method
used to determine or have the term functional drainage in the report.
39) _____ Water heating equipment and operating controls - Observe and report on its type (e.g., gas, electric, solar,
etc.) and condition (operational, inoperative, etc.).
40) _____ Automatic safety controls- Observe and report on presence and visible condition (*TPR valve,
thermocouple, etc.).
41) _____ Flues and vents- Observe and report on condition (required if dwelling has a gas water heater-report on
flues and combustion air ventilation).
42) _____ Fuel distribution system and supports*- Observe and report on condition of all visible fuel piping and
supports.
8.0 Electrical
43) _____ Service type- Observe and report on its type (e.g., overhead/underground) and condition.
44) _____ Service conductor- Observe and report on its type (e.g., copper or aluminum) and condition. You may
report both type and condition as not visible if visibility is restricted.
45) _____ Service ground- Observe and report on the presence and the condition of the system visible grounding.
46) _____ Overcurrent protection devices- Observe and report on the type (breakers and/or fuses) and condition.
Approved: December 5, 2012
4

ADVERTISEMENT

00 votes

Related Articles

Related forms

Related Categories

Parent category: Life
Go
Page of 8