Form Rv-2 - All-Terrain Vehicle Dealer Registration Instructions Page 26
ADVERTISEMENT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56ATTACHMENT B
2. Check the appropriate box(es) on the application for the group(s) of vehicles you will inspect (weights shown are maximum
gross weights):
Group 1
a. All passenger vehicles, suburbans and trucks up to and including 18,000 pounds. Public stations outside the NYMA must
have a New York Vehicle Inspection Program (NYVIP) emissions system. Public stations in the NYMA must have both a
New York State Transient Emissions Short Test (NYTEST) emissions system and a NYVIP emissions system.
b. Trailers up to and including 18,000 pounds
Group 2
a.
All motor vehicles over 18,000 pounds MGW
G
All motor vehicles with a MGW over 10,000 pounds, up to and including 18,000 pounds MGW, when requested by the
G
registrant
All motor vehicles with a seating capacity of more than fifteen passengers, plus a driver
G
All trailers over 18,000 pounds MGW and those trailers with a MGW over 10,000 pounds, up to and including
G
18,000 pounds MGW, when requested by the registrant
b. All semi-trailers
Group 3 - Motorcycles
Group D
High-enhanced emissions testing, using a dynamometer, for all vehicles registered in the NYMA that are not exempt.
Group I (Fleets Only)
High-enhanced emissions testing for vehicles in the NYMA that are exempt from testing with a dynamometer.
Group DL
Diesel emissions testing, for all vehicles registered in the NYMA that are not exempt. You must have a New York State
Department of Environmental Conservation (DEC) approved diesel emissions testing system.
3. Inspection Station applicants will be interviewed before approval to determine whether the following requirements are met:
- if you are applying for a Group 1A (above) public inspection station license outside the NYMA, you must obtain the
NYVIP emissions system approved by the New York State DEC. If you are applying for a Group 1A public inspection
station license in the NYMA, you must obtain both an approved NYTEST system and an approved NYVIP system.
- if inspections are done for the general public, you must have a registered Repair Shop at the same location.
- the access door and enclosed area in which inspections will be conducted must be large enough to accommodate the
class(es) of vehicle(s) that you are applying to inspect. Generally, in a city or village with a population of under 10,000, a
minimum enclosed area of 300 square feet is required; in cities or villages of 10,000 or more, a minimum enclosed area of
600 square feet is required.
- inspection stations must employ at least one full-time Certified Inspector, or the owner/operator must be a full-time
Certified Inspector.
- on-site safeguards such as locked drawers, a locked cabinet or a safe must be provided for storing security documents.
The following equipment is required and will be examined:
1. l/4” to 1/2” paper punch
2. tire tread depth gauge
3. tire pressure gauge
Additional equipment for all heavy vehicle inspection stations: 1. measuring devices for brake adjustment
2. brake drum gauge
3. rotor thickness gauge
PAGE 5 OF9
VS-1.1 (10/07)
ADVERTISEMENT
0 votes
Related Articles
Related forms
Form Rv-2 - Rental Motor Vehicle And Tour Vehicle Surcharge Tax Return Instructions - 2007
Financial
Form Rv-2 - Rental Motor Vehicle, Tour Vehicle, And Car-sharing Vehicle Surcharge Tax - 2016
Financial
Related Categories
Parent category: Legal